White Paper:
New Product Development: Stages and Methods
by Rajan Sambandam, TRC
TRC identifies the best methods for each stage of the product development process, from Idea Generation through Feature Development, Product Development and Product Testing.
The new product development process has the potential to be haphazard because of the inherent uncertainty in the process, as well as the myriad methods available for product development. Setting up an organizing framework to identify the stages in the process, and the methods applicable to each stage, should help in bringing order to the process.
Our purpose in this article is to lay out a framework and identify key methods that are most likely to be useful in each stage. The focus here is on methods that use quantitative data collected mainly through the web thus bringing more validity and flexibility to the process along with speed to market.
We envision the new product development process as an iterative multistage process as shown in Figure 1.
This is a straightforward way of looking at the process that starts with idea generation, moves to development of individual features and then to full product development and finally into product testing. Of course, this is one example of how the process can be viewed and not a rigid framework. There has to be considerable fluidity in the system to accommodate feedback, skipping of stages, use of new methods and perhaps introduction of new stages.
Idea Generation
Many methods are available for the idea generation stage such as brainstorming, Delphi and focus groups. The basic approach is to harness creativity in some form for the development of new ideas. While there is much to recommend for the more qualitative approaches, one of the drawbacks is the lack of quantitative validity to the ideas at this stage. That is, the ideas have not been shown to have popularity in the constituency that matters – the customers. We have found that the Smart Incentives approach can provide both creativity and validation in the same step. Respondents to a survey compete with each other to produce ideas thus introducing creativity into the process. The generated ideas are then evaluated by a peer group to provide the required market validation. This approach can be useful for generating ideas on both whole products and individual features.
Feature Development
Feature development is the process of identifying features that would be of interest to customers. Traditional methods such as Importance Scales can be used, but may not provide sufficient discrimination between features. Pairwise comparisons of features are a straightforward method for identifying feature importance. The task is simple, but can be tedious if a large list of features needs to be culled. More recently developed methods such as Max-Diff scaling can provide a better alternative. Max-Diff is similar to pairwise comparison, except that more than two features are evaluated at a time (3-5) and the most and least preferred alternative is chosen from each set. Some advanced statistical analysis on the back end provides a score for each feature that is generally more discriminatory than a regular importance scale.
Another alternative is the Kano method where the positive and negative aspect of each feature is rated in order to distinguish the “must have“ features from the “nice to have” features. The final method in this stage (that straddles this and the next stage) is the Self-explicated Method (SEM). Respondents rate the desirability of each level of each attribute as well as the importance of each attribute. Combining these two pieces of information gives attractiveness scores (similar to conjoint utilities) for each attribute level. Although all attributes and levels are rated by respondents (as in conjoint analysis), since they are presented individually, this method may be more appropriately seen as useful for feature development.
Product Development
In this stage, combinations of features are used to build or evaluate the product. The Configurator allows survey respondents to build their ideal product by selecting from a list of available features. Usually prices are provided at the feature level to ensure that respondents make realistic decisions. As respondents build their own ideal products, the most popular features and feature combinations rise to the surface, resulting in the automatic development of preference based market segments. The Optimizer is different in that respondents make choices from among fully formed products. Information from their choices is taken into account in creating successive products that are more preferred till the process finally converges on the respondent’s ideal product. This method is more appropriate when the design and packaging (i.e. the visual element) is more important. As with the Configurator, the market segments itself into preference based segments.
The various flavors of conjoint (such as traditional, discrete choice, adaptive) can also be used in this stage to identify feature importance. But care has to be taken to ensure that the basic assumptions are met and that the right type of conjoint is used.
Product Testing
Conjoint analysis can be fruitfully used in this stage also to estimate the interest in various product combinations and especially in running market simulations. The latter ability is very important in cases where a strong competitive market exists and reasonable estimates of take rates and ability to choose the ideal combination for the market are requisites. Concept testing is much more limited than conjoint and is usually used when the product is almost set except for perhaps one or two questions, often relating to price.
In short, the chaos of the product development process can be structured, and appropriate methods applied, to gain maximum benefit at different stages.
This article was written by Rajan Sambandam of TRC, a full-service market research provider located in Fort Washington, PA.
Other content shared by TRC
Better Questions For Segmentation: Use of MAX-DIFF
by Rajan Sambandam, TRC
Using Maximum Difference Scaling as a method in designing surveys may ensure more useful results in your market research. It is a comparative method based on importance that sidesteps the problems associated with traditional importance scales. TRC explains the mechanics behind this method through a detailed example in this white paper. Read Article »
Database Scoring with Object Based Segmentation
by Rajan Sambandam, TRC
Segmentation created from company databases are often lacking the rich segmentation schemes formed by attitudinal surveys. A new approach is Object based segmentation that uses database variables at the basis for forming attitudinal segments, leaving both markets classifiable with clear demographic segments. TRC compares traditional segmentation analysis with Object based. Read Article »
Asymmetry in Product Features: Use of the Kano Method
by Rajan Sambandam, TRC
The presence or absence of product features strongly affect consumer satisfaction with the design. Comparing these features using asymmetry analysis can help identify satisfiers and dissatisfiers from among the features of a product. The Kano method is similar but results in categorizing each respondent's answers. TRC presents this essential method of deciding new product features in detail. Read Article »
Conjoint Analysis versus Self-Explicated Method: A Comparison
by Rajan Sambandam, TRC
Determining feature importance in a product can be divided into two techniques - top-down methods where a customer evaluates the whole product at once, and bottum-up methods where features are evaluated individually or in sets. The former method, Conjoint Analysis, is more common while the latter method, Self-Explicated Method, is not widely used but has practical advantages. TRC compares the two methods in this white paper. Read Article »
Product Configurator
by Rajan Sambandam, TRC
To help customers purchase the right product, companies often use product configurators - tools that let customers design their purchase before ordering. This method is employed as a market research technique, similar to conjoint analysis but without some of the constrictions. This white paper from TRC explains an appropriate use of the product configurator method. Read Article »
Market Segmentation: One Method, Four Examples
by Rajan Sambandam, TRC
Effective market segmentation requires an understanding of the market and the skilled art of finding the appropriate segments. TRC gives four examples of this method's application with results. Read Article »
How to Measure the Value of a Brand
by Rajan Sambandam, TRC
Brand name evokes an inherent value; finding a way to reliably measure that value is crucial in determining product development. A technique called discrete choice conjoint analysis is described in this paper by TRC. Read Article »
Deriving Value from Research: the Use of Conjoint Analysis for Product Development
by Rajan Sambandam, TRC
Marketing research has been used by firms over the last several decades to provide information for decision making. Over time, increasingly sophisticated statistical methods have been developed and deployed in the service of this goal. This article focuses on one such method - conjoint analysis - and its application to product development. Read Article »
Cluster Analysis Gets Complicated
by Rajan Sambandam, TRC
Segmentation studies using cluster analysis have become commonplace. However, the data may be affected by collinearity, which can have a strong impact and affect the results of the analysis unless addressed. This article investigates what level presents a problem, why it's a problem, and how to get around it. Simulated data allows a clear demonstration of the issue without clouding it with extraneous factors. Read Article »
Identifying Feature Importance: A Comparison of Methods
by TRC
Understanding what customers want is fundamental to the new product development process as well as to the process of keeping existing products fresh and relevant. To be successful in this area we need to be able to correctly identify what features are important to consumers. Feature importance can be measured using a variety of methods of differing effectiveness. In this paper we will deal with the following methods: Importance Scales, Pick data, Pairwise Comparisons, and Max-Diff.
Read Article »
Monadic Price Testing vs. Price Laddering
by TRC
Compares two popular pricing methods to understand the difference in take rate information. Read Article »
Understand Choice in Banking: Use of Discrete Choice Conjoint Analysis
by TRC
Conjoint analysis provides incentive for survey respondents to determine which features must not be omitted in their final purchase. The method closely mirrors decision-making in the real world, and as shown by TRC in this white paper, is applicable to many situations including how customers choose their bank. Read Article »
Want better product ideas? Try smart incentives
by Rajan Samandam, TRC
Idea generation from survey respondents is strongly dependent on incentive. Introducing competition strengthens the quantity and quality of creative responses. TRC provides examples of smart incentives in this white paper. Read Article »
An alternative method of reporting customer satisfaction scores
by Rajan Sambandam and George Hausser of TRC
Though customer satisfaction evaluations are widely used, reporting of these scores has varied from one study to another. This is likely the result of each method’s advantages and disadvantages, as well as the personal preferences and habits of the researcher. In this article we review various reporting methods and outline our method with an example. Read Article »
Identifying the Key Drivers of Brand Image
by TRC
Measuring brand image requires looking at direct effects as well as indirect effects of a company's performance. TRC compares traditional multiple regression with SatiscanTM, a method that can review all possible path models. Read Article »
Improving Call Satisfaction: A Case Study
by TRC
TRC presents a case study of analyzing and improving a call center as an on-going data collection process. Read Article »
Improving Claim Satisfaction: A Case Study
by TRC
A case study on applying full-service market research to help an insurance company improve their client satisfaction with claim handling. Read Article »
Non-Response Bias In Survey Sampling
by TRC
Market research accounts for many scenarios to ensure high quality of data. One of the most overlooked problems is non-response bias. TRC describes ways to reduce its effects through survey design and data adjustment in this white paper. Read Article »
Segmentation Success
by Michael Sosnowski, TRC
This paper explains the basic building blocks of the segmentation process and its implementation. Read Article »
Survey of Analysis Methods Part I
by Rajan Sambandam, TRC
Practical marketing research deals with two major problems: identifying key drivers and developing segments. In this two-part series TRC looks at key driver analysis and segmentation. Read Article »
Survey of Analysis Methods Part II
by Rajan Sambandam, TRC
This is Part II of a series looking at aspects of practical marketing research: identifying key drivers and developing segments. This content describes specific segmentation methods: cluster analysis, neural networks, self-organizing map (SOM), and mixture models. Included is a discussion on ideas for developing good segments. Read Article »
Validating Satiscan Using A Split Sample Approach
by TRC
TRC's SatiscanTM model is tested for validity using call center data and a split sample approach. This shows that SatiscanTM produces similar models when run on random halves of an energy industry dataset. Read Article »
Satiscan and Regression Analysis: A Comparison
by TRC
The comparison shows the advantages of SatiscanTM, an analytical method from TRC, over regression in identifying the correct and cost efficient action steps. Read Article »
TURF: New Methods for Implementation
by Westley Ritz, TRC
TURF is a long-established and quite useful marketing research tool, but not everyone is familiar with how it works, or with the latest developments that can make TURF even more effective. The purposes of this paper are twofold: (1) to explain the technique and (2) to describe the latest methods for implementation.
Read Article »
Product Configuration: A Research Approach for the Times
by Rajan Sambandam & Pankaj Kumar, TRC
The marketplace has shifted in the last decade with the ability of consumers to configure the product they want. This white paper explains the basics of configuration, an approach that mimics the real world of customer driven product design to obtain insight into consumer decision-making. Read Article »
Product Configuration: Evidence for Effectiveness
by Rajan Sambandam & Pankaj Kumar, TRC
This white paper looks at the examples from one product configuration study, the kinds of information that can be derived and the possibilities provided by statistical analysis. Read Article »
New Product Research: A Dynamic Approach to Feature Prioritization
by Pankaj Kumar, Westley Ritz and Rajan Sambandam of TRC
Feature prioritization is a very common new product research problem. Over the last few years, the most popular technique has been Max-Diff. However, as the number of features increases it becomes difficult to use. Bracket is a tournament-based approach that produces Max-Diff like results and can easily prioritize fifty or more features. Read Article »
Doing More with Less: Getting Greater Value from Mobile Quant
by TRC
What “more with less” means with respect to mobile MR, and examples from traditional online studies to challenge existing assumptions about what will and will not work on a mobile device. Read Article »
How to measure the value of a brand?
by TRC
Knowing how to price your product that you can optimize your ROI is key. This video explains various ways to measure the value of a brand and talks about a discrete choice conjoint technique as a perfect approach to measuring the value of a brand. Read Article »
Product Configuration with Michael Sosnowski
by TRC
Consider a person who wants to buy a personal computer. The customer can select exactly the combination desired, subject to a price constraint. Would it be possible to use such a process for research? Read Article »
How to Improve Your Market Segmentation
by TRC
Bob Hull from TRC talks about a market research technique for market segmentation and ways of improving them. Read Article »
Rich Raquet Market Research Consulting
by TRC
Rich Raquet is introducing TRC, a research & analytics firm, specializing in new product research, conjoint, segmentation, brand equity, sat & loyalty. Read Article »
